Ubiquiti airMAX PowerBeam AC 5 GHz, 500 mm Bridge, PBE-5AC-500-US

High-Performance airMAX® ac Bridge Incorporating a dish reflector design with proprietary airMAX® ac technology, the PowerBeam™ ac is ideal for CPE deployments requiring maximum performance. Features: Highly Efficient Antenna Beam Performance Custom Ubiquiti® airMAX® ac Processor Up to 450+ Mbps Real TCP/IP Throughput Innovative Snap and Lock Assembly Proprietary InnerFeed™ Technology Please note that this product must be ordered in increments of 2 PBE-5AC-500 Dimensions Radome Excluded Radome Included 520 x 520 x 308 mm (20.47 x 20.47 x 12.13") 525 x 525 x 315 mm (20.67 x 20.67 x 12.40" Weight Radome Excluded Radome Included 2.35 kg (5.18 lb) 3.15 kg (6.95 lb) Power Supply 24V, 0.5A Gigabit PoE Max. Power Consumption 8.5W Power Method Supported Passive PoE (Pairs 4, 5+; 7, 8 Return) Voltage Range 20-26VDC Networking Interface (1) 10/100/1000 Ethernet Port Processor Specs Atheros MIPS 74Kc, 720 MHz Memory 128 MB DDR2, 16 MB Flash LEDs (1) Power, (1) LAN, (4) WLAN Signal Strength LEDs Software-Adjustable to Correspond to Custom RSSI Levels Max. VSWR 1.5:1 Channel Sizes PtP Mode PtMP Mode 10/20/30/40/50/60/80 Mhz 10/20/30/40 Mhz Polarization Dual Linear Enclosure Outdoor UV Stabilized Plastic Mounting Pole-Mount (Kit Included) Wind Loading 264.6 N @ 96 km/h (60 lbf @ 60 mph) Wind Survivability 96 km/h (60 mph) ESD/EMP Protection Air: ± 24 kV, Contact: ± 24 kV Operating Temperature -40 to 70° C (-40 to 158° F) Operating Humidity 5 to 95% Noncondensing Wireless Approvals FCC, IC, CE RoHS Compliance Yes Salt Fog Test IEC 68-2-11 (ASTM B117), Equivalent: MIL-STD-810 G Method 509.5 Vibration Test IEC 68-2-6 Temperature Shock Test IEC 68-2-14 UV Test IEC 68-2-5 at 40° C (104° F), Equivalent: ETS 300 019-1-4 Wind-Driven Rain Test ETS 300 019-1-4, Equivalent: MIL-STD-810 G Method 506.5 Gain 27 dBi Operating Frequency Mhz Worldwide 5150 - 5875 USA U-NII-1 U-NII-2A U-NII-2C U-NII-3 5150 – 5250 5250 – 5350 5470 – 5725 5725 – 5850