Hall Research Video and Phantom Power over UTP transmitter, UV2-S

The Model UV2-S is a 2-channel video splitter that can send a VGA or component video signal to multiple displays on Cat5 cable. This unit feature a standard HD15 VGA connector for the input and has 2 RJ45 connectors for the outputs. It also provide an additional VGA output for connection to a local monitor. The UV2-S can drive Cat5 cables of lengths up to 500 feet.  At the remote (receiving) end of the Cat5 cables a Model UV1-R is required to convert the UTP signal back to VGA for connection to a monitor. In most setups only one power supply is necessary for the entire system. The UV2-S Sender/Splitter come with a power supply that is capable of powering itself and all the UV1-R receivers. For Cat5 runs of over 300 feet, the receivers need their own additional supplies that must be ordered separately (HRT model # 511-GS569). Made in the USA.

Features

• Amplifies the signal for clean and crisp transmission
• Handles resolutions up to 1920x1440 at 60Hz
• Rugged, Reliable, Compact size
• Drive standard CAT5 cables to 500 feet for (VGA and Component Video) or to 2000 feet for (Composite Video + Audio)
• Support for local monitor at transmitter
• Multiple Cat5 outputs
• Transmit video and phantom power on one cable
• Eliminates the need for bulky, expensive and hard to build multi-coaxial cables for High-Resolution A/V extension
• Differential signaling eliminates ground loops and noise

Specifications

• Dimensions:
  1.22" H x 4.86" W x 2.6" D
• Weight:
  3 lbs. (shipping)
• Power Supply:
  From utility-power (mains) outlet, through included external Universal power supply. Output Voltage: 9 DC Center-Positive, Do not substitute any other external power supply without contacting the factory first
• Max Distance:
  Up to 500 ft. (150 m) for VGA and Component Video models, or 2000 ft (609 m) for Composite Video and Audio models
• Resolution:
  Up to 1920 x 1440 non-interlaced at 60Hz
• Standards:
  VGA, SVGA, XGA, or UXGA video
• Video Types:
  VGA through UXGA, RGBS, RGsB (sync on green), or YpbPr

About Hall Research

Hall Research has been a leader in the design and manufacture of innovative Video over CATx, matrix switchers, scaling and automation products. As the creators of the device that revolutionized Video over Cat5, the Mini-Cat®, Hall Research has risen to prominence in the Audio/Video industry. Our products are used by every major industry in thousands of installations worldwide.