Bosch
Bosch MIC INTEOX 7100I 2MP 30X, IP68 GRAY; USES 60W HPOE; ILLUMINATOR (SOLD SEPARATELY REQUIRES 95W HPOE), MIC-7602-Z30G
- SKU:
- MIC-7602-Z30G
- UPC:
- 800549975513
- MPN:
- MIC-7602-Z30G
- Condition:
- New
Description
Bosch MIC INTEOX 7100I 2MP 30X, IP68 GRAY; USES 60W HPOE; ILLUMINATOR (SOLD SEPARATELY REQUIRES 95W HPOE), MIC-7602-Z30G
MIC INTEOX 7100I 2MP 30X, IP68 GRAY; USES 60W HPOE; ILLUMINATOR (SOLD SEPARATELY REQUIRES 95W HPOE)
- Starlight camera technology with excellent low-light sensitivity (color = 0.0047 lx) and High dynamic range (120 dB) (to see details in bright and dark areas simultaneously)
- Flexible streaming capabilities powering three independent streams
- Edge intelligence and object detection even when the camera is moving
- Optional illuminator with multispectral LEDs that distribute IR light uniformly in the field (up to 550 m (1804.50 ft)) to avoid dark spots or an over-illuminated scene
Key Specifications
Camera functionality | Backlight compensation (BLC); Intelligent defog; Pixel counter |
Color | Gray |
Color (lx) | 0.0047 lx |
Ethernet type | Auto-sensing; Full / half duplex; 100BASE-TX; 1000BASE-T |
Input voltage (VAC) | 21 – 30 VAC |
Iris control | Automatic (with manual override) |
Lens aperture (/F) | 1.50 – 4.80 °F |
Lens focal length (mm) | 6.60 – 198 mm |
Lens zoom (x) | 30 x |
Material | Aluminum |
Monochrome (lx) | 0.0013 lx |
Operating temperature (°C) | -40 – 65 °C |
Pan range (°) | 0° – 360° continuous |
Pre-position accuracy (average) (°) | 0.05 ° |
Protocols / standards | IPv4; IPv6; UDP; TCP; HTTP; HTTPS; RTP/RTCP; IGMP V2/V3; ICMP; ICMPv6; RTSP; FTP; ARP; DHCP; APIPA (Auto-IP, link local address); NTP (SNTP); SNMP (V1, MIBII); SNMP (V3, MIBII); 802.1x, EAP/TLS; DNS; DNSv6; DDNS (DynDNS.org, selfHOST.de, no-ip.com); SMTP; iSCSI; UPnP (SSDP); DiffServ (QoS); LLDP; SOAP; CHAP; Digest authentication |
Sensor type | 1/2 inch CMOS |
Storage temperature (°C) | -45 – 70 °C |
Video compression | H.264 (ISO/IEC 14496-10); M-JPEG; JPEG; H.265/HEVC |
Weight (kg) | 8.70 kg |
Parts included with this product
Quantity | Component |
1 | MIC 7100i camera |
1 | spanner tool [to remove and to attach the yoke caps in order to cant the camera if desired, and to remove the access plug from the camera head when installing the optional illuminator accessory (sold separately)] |
1 | base gasket |
1 | RJ45 coupler |
1 | MAC address labels |
1 | Quick Installation Guide |
1 | Safety instructions |